From repairs to full replacements, our team keeps water moving away from your home. We work safely, cleanly, and give you clear options with photos. This hub explains every gutter service we offer in Toronto.
Soffits help your attic breathe and keep pests out. We fix cracked vinyl or aluminum panels, secure loose sections, replace rotten wood, and open blocked vents so air can flow from eaves to ridge. Good ventilation lowers moisture, protects insulation, and reduces the chance of ice forming at the edge of the roof.
Fascia boards carry the gutters, so they must be straight and solid. We install new wood or aluminum-wrapped fascia with proper backing, sealed joints, and a clean line that sets the right pitch for your eavestrough. Where needed we add drip edge so water cannot wick behind the gutter and stain the boards.
Leaks and winter ice can soften fascia over time. We remove decayed sections, treat any minor rot, and refasten with correct fasteners into sound framing. If you prefer a maintenance-light finish, we cap the new fascia in aluminum for a neat look that stands up to Toronto weather.
Heat cables help ice-prone eaves stay open so meltwater can drain. We use self-regulating cables, lay safe patterns in valleys and along the eavestrough, and connect to a dedicated GFCI. Smart controls can switch on by temperature or moisture. A planned layout limits energy use and keeps paths clear without hot spots.
If a section no longer warms, we test the cable, splices, and controller. Many issues come from damaged insulation, failed end seals, or loose connections. We replace bad lengths, remake waterproof splices, and label breakers so winter startup is easy and reliable.
Storms can pull a gutter loose, crush a downspout, or open a seam. We secure the area, stop active leaks, rehang sections, and patch holes so water is safely diverted. You get photos of the damage and options for a permanent fix once the weather calms.
For small but urgent issues, our crew can handle same-day fixes like loose elbows, missing end caps, minor pitch adjustments, and quick reseals. We arrive with common parts on the truck and leave the site clean so you can get back to your day.
Short downspouts dump water near the foundation. We add neat aluminum or flexible extensions, hinged elbows for lawn care, or ground-level splash blocks. The goal is simple: move water at least six feet from the wall to reduce seepage, settlement, and icy walkways.
Sagging runs overflow even in light rain. We replace loose spikes with hidden hangers, tighten spacing, and reset the slope toward outlets. Strong attachment points make the system quiet, straight, and ready for heavy downpours and snow load.
Leaks often start at joints and end caps. We clean the metal, dry the area, and apply high-grade sealant for a flexible, watertight bond. Where seams have warped, we refit or replace the section to stop repeat leaks.
We install 5-inch or 6-inch aluminum eavestroughs sized to your roof area, with the right number of outlets and downspouts. Corners are hand-mitred or factory fittings, and everything is pitched for reliable flow. You choose colours that match trim for a tidy finish.
When the system is tired, replacement prevents ongoing leaks and staining. We remove old troughs, repair fascia as needed, and upgrade to seamless sections with sturdier hangers. The result is a fresh, straight line that moves water away from the house as it should.
From small holes to misaligned outlets, we handle targeted fixes that extend the life of your gutters. After repairs we test with water, check for level, and confirm that downspouts are clear so you see a real improvement right away.
Seamless gutters are formed on site to the exact length of each run. With fewer joints there are fewer leak points and a cleaner look. We use thick-gauge aluminum, colour-matched to your home, and mount with hidden hangers for strength and curb appeal.
All services:
Gutter service
Gutter cleaning service
Roofing contractor
Snow removal service