Blog

The “why is it hanging like that” moment

A lot of Toronto homeowners notice sagging right after a heavy wet snowfall, when the melt refreezes, and the weight ramps up.

Roofing threads include blunt advice: after snow and ice thaws, refasten using hidden screw hangers, reseal seams, and assess damage.

And the City of Toronto guidance calls out fixing low spots and sagging areas as part of proper maintenance.

Common causes

1. Old spike and ferrule fastening that loosens over time
2. Too few hangers for the span
3. Standing water that adds weight
4. Ice load that bends metal and pulls fasteners out

What you should check

• Is the fascia wood soft or rotted where the eavestrough attaches
• Are fasteners pulling out, or is the metal itself bent
• Is the slope still correct, or has it dipped into a permanent low spot

Fix vs replace

Repair makes sense when:

• The metal is in good shape
• It is one short run
• The fascia is solid

Typical repair:

• Add hangers
• Re-pitch the run
• Replace a damaged bracket line

Replacement makes sense when:

• Multiple runs are sagging
• The metal is warped or cracked
• The fascia needs repair, and the eavestrough needs to come off anyway
• You have recurring ice load failures

 

Cost ranges

As a rule, you will see pricing structured per linear foot, plus add-ons if fascia repair is needed. HomeStars explicitly lists fascia repair as an additional cost category that can appear in quotes.

 

Related Posts

• Ice dams and frozen eavestrough problems
• Overflowing eavestrough from leaf buildup
• Water behind the eavestrough and fascia damage